In this article, we will explore solutions to troubleshoot the “No Internet, Secured WiFi” error on Windows 10 and 11.
Troubleshooting “No Internet, Secured” Error on Windows 10
If you’re receiving the “No Internet, Secured” error message on your Windows 10 or 11 device, there are a few ways to troubleshoot the issue. First, try restarting your computer and router to see if that resolves the problem. If not, check that your wireless network adapter is working properly by going to Device Manager and updating the driver. You can also try forgetting the network and reconnecting to it by clicking on the network icon in the system tray and selecting “Forget this network” and then re-entering your login information. If you’re using a VPN, make sure it’s not the issue by disconnecting it temporarily. If none of these solutions work, it may be a problem with your network router or a fault in the Windows Sockets API. In this case, seek more information or assistance from a guide or expert.
Check Network Configuration and Connection Properties
| Step | Action |
|---|---|
| 1 | Open the Windows Start menu and type “Network Status”. Click on “Network Status” in the search results. |
| 2 | Click on “Change adapter options”. |
| 3 | Right-click on the WiFi network you are connected to and select “Properties”. |
| 4 | Click on “Internet Protocol Version 4 (TCP/IPv4)” and then click on the “Properties” button. |
| 5 | Make sure “Obtain an IP address automatically” and “Obtain DNS server address automatically” are both selected. Click “OK”. |
| 6 | Go back to the “Network Status” page and click on “Network troubleshooter”. Follow the on-screen instructions to fix any network issues. |
Fixing Wired and Wireless Network Problems
If you’re experiencing a “No Internet, Secured” error on your Windows 10 or 11 computer, there are a few things you can do to fix it. First, try turning your Wi-Fi off and on again by clicking the Wi-Fi icon in the system tray and toggling the switch. If that doesn’t work, try restarting your computer and/or your network router. You can also try disabling any VPNs you have running, as they may be causing the issue. If you’re still having trouble, you may need to update your network adapter drivers or troubleshoot using the Windows Network Diagnostics tool. If all else fails, you can try resetting your network settings entirely. Keep in mind that the reason for the error may vary, so it’s important to try different solutions until something works.
import subprocess
def check_wifi_connection():
try:
output = subprocess.check_output(['ping', '-c', '1', 'www.google.com'])
return True
except subprocess.CalledProcessError:
return False
This code uses the subprocess module to execute a ping command to www.google.com. If the command returns successfully, the function returns True, indicating that the Wi-Fi connection is active and internet is available. Otherwise, it returns False.
2. Bash script for automatically connecting to a Wi-Fi network with no internet access:
#!/bin/bash
SSID="MyNetwork"
PASSWORD="MyPassword"
while true; do
if ( iwconfig wlan0 | grep -q "$SSID" ) && ( ! ping -c 1 google.com ); then
echo "Connected to $SSID but no internet access. Attempting to reconnect..."
nmcli device wifi connect "$SSID" password "$PASSWORD"
fi
sleep 10
done
This script checks if the Wi-Fi network with SSID “MyNetwork” is connected but has no internet access. If so, it attempts to reconnect using the nmcli command line tool, which can be used to manage NetworkManager settings. The script runs in an infinite loop with a 10-second delay between attempts.
Disabling VPN and IPv6 Address
To fix the “No Internet, Secured WiFi” error on Windows 10 & 11, try disabling VPN and IPv6 address. Here are the steps to follow:
1. Open the taskbar and right-click on the network icon, which looks like a world symbol.
2. Select “Open Network & Internet settings” from the menu.
3. Click on “Change adapter options” in the “Advanced network settings” section.
4. Find the VPN and IPv6 adapters, right-click on them, and select “Disable”.
5. If you don’t see the VPN and IPv6 adapters, click on “View” in the menu bar and select “Show hidden devices”.
6. Restart your PC and check if the internet connection works.
Disabling VPN and IPv6 address can help fix the “No Internet, Secured WiFi” error because sometimes these things can interfere with your network connection. By following these steps, you can turn them off and potentially fix the problem.
Updating Network Adapter Driver and Refreshing IP Configuration
To fix the “No Internet, Secured” Wi-Fi error on Windows 10 & 11, updating your network adapter driver and refreshing your IP configuration can be helpful. First, open the Device Manager and locate your network adapter. Right-click on it and select “Update driver.” Follow the prompts to complete the update. Next, refresh your IP configuration by opening the Command Prompt and typing “ipconfig /release” followed by “ipconfig /renew” and “ipconfig /flushdns” commands. Finally, restart your PC and check if the internet connection works. If not, try disabling your VPN server or checking your Wi-Fi router. These simple steps should help you fix the secured error and get back to browsing web pages in no time.
Resetting Network and Wi-Fi Properties
- Open the Start menu and type cmd in the search bar.
- Right-click on Command Prompt and select Run as administrator.
- Type the following command: netsh winsock reset
- Press Enter and wait for the process to complete.
- Type the following command: netsh int ip reset
- Press Enter and wait for the process to complete.
- Type the following command: ipconfig /release
- Press Enter and wait for the process to complete.
- Type the following command: ipconfig /renew
- Press Enter and wait for the process to complete.
- Type the following command: ipconfig /flushdns
- Press Enter and wait for the process to complete.
- Restart your computer.
Setting Fixed DNS Server and Disabling 5Ghz
To fix the “No Internet, Secured” WiFi error on your Windows 10 or 11 laptop, try setting a fixed DNS server and disabling 5Ghz.
To set a fixed DNS server, go to your Network and Sharing Center and click on “Change adapter settings.” Right-click on your WiFi network and select “Properties.” Double-click on “Internet Protocol Version 4 (TCP/IPv4)” and select “Use the following DNS server addresses.” Enter “8.8.8.8” for the Preferred DNS server and “8.8.4.4” for the Alternate DNS server. Click “OK.”
To disable 5Ghz, press the Windows key + X and select “Device Manager.” Expand “Network adapters” and right-click on your WiFi adapter. Select “Properties” and go to the “Advanced” tab. Find “802.11n/ac Wireless Mode” and set it to “802.11n.” Click “OK.”
Restart your laptop and check if the error message is gone. If not, try other ways to fix the issue or consult a guide online.
Removing or Disabling Internet Security Software
- Step 1: Open the Start menu and search for “Control Panel.”
- Step 2: Click on “Control Panel” and select “Programs and Features.”
- Step 3: Find the internet security software you want to remove or disable and click on it.
- Step 4: Click on “Uninstall” or “Disable.”
- Step 5: Follow the prompts to complete the uninstall or disable process.
- Step 6: Restart your computer to complete the process.
Changing Power Plan Settings and Getting Closer to Router
To fix the “No Internet, Secured” Wi-Fi error on Windows 10 & 11, try changing your power plan settings and moving closer to your router.
To change power plan settings, go to your taskbar and click on the battery symbol. Then click on “Power & sleep settings” and select “Additional power settings.” From there, choose your preferred power plan and click “Change plan settings.” Adjust the settings to your liking and click “Save changes.”
To get closer to your router, move your device closer to the router or consider installing a Wi-Fi extender.
Note: If you’re using a VPN, try disabling it to see if that fixes the issue. You can also try resetting your Wi-Fi adapter by pressing the Windows key + X, then selecting “Device Manager.” Find your Wi-Fi adapter, right-click it, and select “Disable device.” Wait a few seconds, then right-click the adapter again and select “Enable device.”
Hopefully, one of these solutions will fix the “No Internet, Secured” Wi-Fi error and get you back to browsing the web without any issues.
Forgetting and Reinstalling Network Connection
- Click on the Wi-Fi icon in the taskbar
- Click on Network & Internet Settings
- Click on Wi-Fi
- Scroll down and click on Manage known networks
- Select the network causing the issue
- Click on Forget
- Restart your computer
- Click on the Wi-Fi icon in the taskbar again
- Select the network causing the issue
- Click on Connect
- Enter your Wi-Fi password
- Click on Connect
Contacting ISP or Repair Shop for Assistance
If you’ve tried troubleshooting your Wi-Fi connection and are still receiving the “No Internet, Secured” error on your Windows 10 or 11 device, it may be time to contact your ISP or a repair shop for assistance. Before doing so, try restarting your Wi-Fi router and resetting your network settings on your device. If the issue persists, reach out to your ISP for help with any connection errors or faults that may be causing the problem. Alternatively, a repair shop may be able to diagnose and fix any hardware or software issues with your device that are preventing you from accessing the internet. Remember to provide specific details about the error message and any troubleshooting steps you have already taken to help them diagnose the issue more efficiently.
