If you’re experiencing a Thinkpad that’s stuck on the startup screen, you’re not alone. This article provides 9 different methods to resolve the issue.
Solutions for a Lenovo Laptop Stuck on Startup Screen
If your Lenovo laptop is stuck on the startup screen, there are several ways to resolve this issue.
1. First, try powering off the machine and unplugging it from the outlet. Remove the battery and hold down the power button for 30 seconds, then plug everything back in and try turning your computer on again.
2. If that doesn’t work, try accessing the BIOS settings by pressing F2 or the key indicated on your startup screen. Check that your hard drive is properly recognized and set as the primary boot device.
3. Use diagnostics tools or a utility like Tenorshare Windows Boot Genius to identify and fix any system issues or hard drive problems.
4. If the issue persists, try Resetting BIOS to default settings.
5. Boot your computer in safe mode to troubleshoot any drivers or software that may be causing the issue.
6. Use a bootable USB or CD drive to repair or reinstall your operating system.
7. Check for any attacks or malware that may have triggered the issue.
8. Update your drivers, firmware, and operating system to ensure that everything is up-to-date.
9. If all else fails, consider contacting Lenovo support for further assistance.
Try these solutions to get your Lenovo laptop past the startup screen and back to normal.
Performing a Power Drain to Fix the Issue
Performing a Power Drain can help fix the Thinkpad stuck on startup screen issue. This method is useful when your computer black screen or is stuck on the logo screen, boot screen, or loading screen. To perform a Power Drain, follow these steps:
Step 1: Unplug your device and remove the battery, if possible.
Step 2: Press and hold the power button for 30 seconds.
Step 3: Release the button and reconnect the power supply and battery.
Step 4: Turn on your machine and check if the boot screen problem is resolved.
This method works for many Lenovo devices, including the Lenovo ThinkCentre, Ideapad 320, Lenovo Legion, and Lenovo B590.
If this method doesn’t fix the issue, try other methods mentioned in this article, such as Reset BIOS, diagnostics tools, MiniTool, Tenorshare Windows Boot Genius, or preparing automatic repair. Avoid droves of attacks by using reliable utility and diagnostics tools to troubleshoot and fix computer issues.
Running Lenovo Diagnostics Tools for Troubleshooting
- Access the Lenovo Diagnostics Tools by pressing the Novo button or entering BIOS
- Turn off your Thinkpad
- Press the Novo button or F1 during startup to enter BIOS
- Select the “Diagnostics” option from the menu
- Press “Enter” to start the Lenovo Diagnostics Tools
- Perform system scan
- Select “System Scan” from the Lenovo Diagnostics Tools menu
- Click “Run Quick Tests” or “Run Full Tests” depending on your preference
- Wait for the scan to complete
- Review the results of the scan
- Click on each test to view the results
- Note any errors or issues detected
- Take action based on scan results
- Follow the on-screen instructions to resolve any issues
- Refer to Lenovo support documentation or contact support for further assistance
# This sample code is for educational purposes only and may not work in all cases.
# Import necessary libraries
# Define function to check if Thinkpad is stuck on startup screen
# Set the path to the startup folder
startup_folder = os.path.join(os.getenv('APPDATA'), 'Microsoft', 'Windows', 'Start Menu', 'Programs', 'Startup')
# Check if any programs are running on startup
if len(os.listdir(startup_folder)) == 0:
# Define function to restart the Thinkpad
# Send the restart command to the operating system
os.system('shutdown /r /t 0')
# Main program loop
# Check if Thinkpad is stuck on startup screen
# Restart the Thinkpad
# Wait for 10 seconds and then check again
This code checks if any programs are running on startup and if so, restarts the Thinkpad to resolve the issue. However, it is important to note that this code may not work in all cases and should only be used as a reference or starting point for troubleshooting the issue.
Starting Laptop in Safe Mode to Resolve the Problem
Starting your laptop in safe mode can help resolve a myriad of problems, including boot screen and logo screen issues. Here are the steps to start your Lenovo Thinkpad in safe mode:
Step 1: Turn on your device and press the F8 key repeatedly until you see the Advanced Boot Options menu.
Step 2: Once there, select Safe Mode with Networking and press Enter.
Step 3: Your computer will now boot into Safe Mode, where you can troubleshoot and fix any problems such as hard drive issues or system file corruption.
To exit Safe Mode and return to normal startup, simply restart your laptop. If this doesn’t solve the problem, try other ways such as Reset BIOS or preparing automatic repair.
Droves of users have successfully resolved their laptop freezes and other issues with this simple mode. Remember to always back up your files and data before attempting any fixes, and try using tools like MiniTool or booting from a CD drive or USB hard drive if necessary.
Resetting BIOS Settings to Default
- Shut down the Thinkpad and unplug it from any power source.
- Remove the battery from the Thinkpad.
- Press and hold the power button for 30 seconds to release any remaining charge.
- Locate the CMOS battery on the motherboard.
- Remove the CMOS battery and wait for 5 minutes.
- Reinsert the CMOS battery and the Thinkpad battery.
- Plug the Thinkpad back in and turn it on.
- Press the appropriate key to enter the BIOS setup utility (usually F1 or F2).
- Locate the option to reset the BIOS settings to default and select it.
- Save and exit the BIOS setup utility.
Disabling Lenovo Service Engine in BIOS Settings
To disable Lenovo Service Engine in BIOS settings, follow these steps:
1. Restart your Lenovo computer and press the F1 key to enter the BIOS menu.
2. Navigate to the Security tab and select the Lenovo Service Engine option.
3. Disable the Lenovo Service Engine by selecting the option and pressing the Enter key.
4. Save the changes and exit the BIOS settings.
This should resolve the issue of your Thinkpad being stuck on the startup screen. If you are still experiencing problems, consider checking for hard drive problems or other triggers that may be causing the issue. Remember that different users and computers may have their own myriads of loading screen issues, so it’s important to troubleshoot the specific case.
For more information on fixing computer issues, check out our other articles on troubleshooting and optimizing your devices.
Reinstalling Windows Operating System
If none of the 9 ways to resolve a Thinkpad stuck on startup screen have worked, it may be necessary to reinstall the Windows Operating System. This will wipe the computer clean and start fresh. First, back up any important files to a USB hard drive or other external storage device. Next, insert the Windows installation media and restart the computer. Press the boot menu key and select the installation media as the boot device. Follow the on-screen prompts to reinstall Windows. This should fix any logo, black screen, boot screen, or other triggers causing the startup problem. Keep in mind that this will erase all data on the computer, so be sure to have a backup. Reinstalling the OS is a last resort, but it can solve many laptop freezes, boot loops, and other issues.
Recovering Data from a Crashed Computer
|1||Try to restart the computer in Safe Mode|
|2||Use System Restore to revert back to a previous state|
|3||Uninstall any recently installed software or drivers|
|4||Run a virus scan on the computer|
|5||Check for any hardware problems|
|6||Use a recovery disk or USB drive to access the computer’s files|
|7||Use data recovery software to retrieve lost files|
|8||Take the computer to a professional data recovery service|
|9||As a last resort, replace the hard drive and reinstall the operating system|
Backing Up Files Before Factory Reset or Reinstallation
Before you attempt to fix your Thinkpad stuck on the startup screen, it’s important to backup your files. This will ensure that you don’t lose any important data during the factory reset or reinstallation process. Here’s how to do it:
1. Connect an external hard drive or USB drive to your computer.
2. Open File Explorer and select the files you want to backup.
3. Right-click and select “Copy”.
4. Navigate to your external drive and right-click.
5. Select “Paste” to transfer the files.
Alternatively, you can use a cloud storage service like OneDrive or Google Drive to backup your files.
Remember to also backup any system files you may need in the future. Once you’ve completed the backup process, you can proceed with the Thinkpad fix by following the steps outlined in this article.
Conclusion: Safe and Risky Ways to Fix Lenovo Stuck on Boot Screen
In conclusion, there are both safe and risky ways to fix a Lenovo stuck on boot screen. For a safe approach, try resetting the BIOS settings by removing the CMOS battery or using a jumper. Another option is to run a system file check using the command prompt (sfc /scannow). However, if you are comfortable with more risky solutions, you can try updating the BIOS or reinstalling the operating system. Be cautious and back up all important data before attempting these methods. If the issue persists, it may be a hardware problem and contacting Lenovo support may be necessary. Regardless, with these 9 ways to resolve a Lenovo stuck on boot screen, you should be able to troubleshoot the issue and get your computer up and running again.