Unmasking the Culprit: Resolving Windows 10 Bugcheck 0x0000007e and BSOD Errors
Causes of the Blue Screen of Death 0x0000007e
The Blue Screen of Death (BSOD) with error code 0x0000007e can be caused by several factors. One common reason is driver corruption, which can occur due to outdated or incompatible drivers. Another possible cause is issues with the system’s software or registry, such as corrupted system files. Hardware problems, such as a faulty hard drive or power supply, can also trigger this error.
To fix this issue, try updating your drivers to the latest version. Additionally, run a hardware diagnostic test to check for any hardware problems. If the issue persists, you can try repairing the Windows installation or performing a system restore.
How to Fix the Bugcheck 0x0000007e Error
To fix the Bugcheck 0x0000007e error and BSOD errors on Windows 10, follow these steps:
1. Restart your computer and press the F8 key repeatedly during startup to enter Safe Mode.
2. In Safe Mode, open the Device Manager by pressing Windows key + X and selecting “Device Manager.”
3. Expand the “Display adapters” category and right-click on your graphics driver.
4. Select “Uninstall device” and check the box that says “Delete the driver software for this device.”
5. Click “Uninstall” to remove the driver.
6. Restart your computer and let Windows automatically install the default graphics driver.
7. If the error persists, download and install the latest driver from your computer manufacturer’s website.
8. Update your BIOS to the latest version from your computer manufacturer’s website.
9. Check for any hardware issues by running diagnostic tests on your computer.
10. If all else fails, consider using a professional repair tool like PassFab FixUWin to fix the error.
Check Hard Drive Using CHKDSK Command
To check your hard drive for any issues using the CHKDSK command, follow these steps:
1. Press the “Windows” key + “X” and select “Command Prompt (Admin).”
2. In the command prompt window, type “chkdsk C: /f /r” and press “Enter.” Replace “C:” with the drive letter where your Windows is installed.
3. The CHKDSK command will start scanning your hard drive for errors and fix any issues it finds. This process may take some time, so be patient.
4. Once the scan is complete, restart your computer and see if the error persists.
By running CHKDSK, you can fix common hard drive problems that could be causing the 0x0000007e or BSOD errors. If the issue continues, it may be necessary to seek further assistance from a professional or refer to other troubleshooting methods.
Use Registry Editor for Error Resolution
To fix the Windows 10 Bugcheck 0x0000007e and BSOD errors, you can use Registry Editor. Here’s how:
Step 1: Press the Windows key + R to open the Run dialog box. Type “regedit” and press Enter.
Step 2: In Registry Editor, navigate to the following key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Intelppm
Step 3: In the right pane, double-click on the “Start” value.
Step 4: Change the value data from “3” to “4” and click OK.
Step 5: Close Registry Editor and restart your computer.
This should help resolve the Bugcheck 0x0000007e and BSOD errors on your Windows 10 PC. If the issue persists, it may be caused by other factors, and further troubleshooting may be required.
Update Device Drivers and BIOS
To fix Windows 10 Bugcheck 0x0000007e and BSOD errors, it is important to update your device drivers and BIOS. Outdated or incompatible drivers can cause these errors to occur. To update your device drivers, follow these steps:
1. Press the Windows key + X and select Device Manager.
2. Expand the categories and locate the devices with a yellow exclamation mark.
3. Right-click on the device and select Update Driver.
4. Choose “Search automatically for updated driver software” and follow the on-screen instructions.
To update your BIOS, follow these steps:
1. Visit your computer manufacturer’s website and search for the latest BIOS version for your specific model.
2. Download and save the BIOS update file to a USB drive.
3. Restart your computer and press the necessary key (usually F2, F10, or Del) to enter the BIOS setup.
4. Navigate to the BIOS update section and follow the instructions to install the update from the USB drive.
Updating your device drivers and BIOS can help resolve the Windows 10 Bugcheck 0x0000007e and BSOD errors.
Remove Extra Space to Resolve the Error
To resolve the Windows 10 bugcheck 0x0000007e and BSOD errors, follow these steps:
1. First, remove any extra space in the article. This can often cause errors in the system.
2. Check the error code displayed on the blue screen. If it is 0x0000007e, proceed with the following steps.
3. Press the power button on your PC to turn it off.
4. Restart your computer and press F8 repeatedly to enter the Advanced Boot Options menu.
5. Select “Safe Mode” and press Enter.
6. Once in Safe Mode, open File Explorer and navigate to C:\WINDOWS\MEMORY.DMP.
7. Delete the MEMORY.DMP file.
8. Check for any disk partition corruption by running tests like PassFab FixUWin.
9. If the error persists, it may be caused by corrupted system files. Use the System File Checker (SFC) tool to scan and repair these files.
10. Restart your computer and check if the problem has been resolved.
Recover Data Lost After the Blue Screen Error
If you’ve encountered a blue screen error with the code 0x0000007e, don’t worry, there are steps you can take to recover any data that may have been lost.
Step 1: Start by ensuring your computer is powered off.
Step 2: Press the power button to turn on the machine.
Step 3: As soon as the computer begins to boot, press and hold the power button until it shuts down again.
Step 4: Repeat this process two more times.
Step 5: On the fourth start, allow the computer to fully boot.
Step 6: Check for any error codes or messages displayed.
If your computer still experiences the blue screen error, it may be necessary to perform a disk partition. For detailed instructions on how to do this, please refer to the article titled “Fixing Windows 10 Bugcheck 0x0000007e and BSOD Errors.”
Fix Printer Error 0X0000007e on Windows 10
To fix printer error 0X0000007e on Windows 10, follow these steps:
1. Restart your computer and the printer. Sometimes a simple restart can resolve the issue.
2. Update your printer drivers. Press the Windows key + X and select “Device Manager.” Expand the “Printers” category, right-click on your printer, and select “Update driver.” Follow the on-screen instructions to complete the update.
3. Check for Windows updates. Press the Windows key + I to open the Settings app. Go to “Update & Security” and click on “Check for updates.” Install any available updates.
4. Run the Windows Printer Troubleshooter. Press the Windows key + I to open the Settings app. Go to “Update & Security” and click on “Troubleshoot.” Select “Printer” and click on “Run the troubleshooter.”
5. If the issue persists, consider reinstalling the printer. Press the Windows key + X and select “Device Manager.” Expand the “Printers” category, right-click on your printer, and select “Uninstall device.” Restart your computer and reinstall the printer using the manufacturer’s instructions.
If none of these solutions work, it may be worth contacting the printer manufacturer for further assistance.
