Unlocking the secrets behind the frustrating “This Device Cannot Start (Code 10)” error on your iPhone, this article presents ten uncomplicated solutions to get your device up and running smoothly again.
Understanding the Code 10 Error
1. Check Device Manager: Open Device Manager and look for a yellow exclamation mark next to the problematic device.
2. Run the Troubleshooter: Use the built-in Troubleshooter in Windows 10 to automatically diagnose and fix driver errors. Search “msdt.exe -id DeviceDiagnostic” in the Start menu to launch it.
3. Update Drivers: Update the device drivers for your iPhone by visiting the manufacturer’s website or using a driver update software.
4. Verify USB Connections: Ensure that your iPhone is connected properly to the USB port on your desktop computer or laptop.
5. Restart Your PC: Sometimes a simple restart can resolve the issue. Restart your computer and check if the error persists.
6. Uninstall and Reinstall Drivers: Remove the device drivers from Device Manager and reinstall them from scratch.
7. Check for Windows Updates: Install the latest Windows updates to ensure compatibility with your iPhone.
8. Change USB Port: Try connecting your iPhone to a different USB port on your computer to rule out any port-related issues.
9. Disable and Enable the Device: In Device Manager, disable the problematic device, wait a few seconds, and then enable it again.
10. Seek Professional Help: If none of the above methods work, consider contacting Apple Support or a technician for further assistance.
Methods to Fix the Device Start Error (Code 10)
- Restart your iPhone: Sometimes a simple restart can resolve the device start error (Code 10).
- Update your iPhone: Ensure your iPhone is running the latest version of iOS to fix the device start error (Code 10).
- Check for driver updates: Make sure you have the latest drivers installed for your iPhone on your computer.
- Disconnect and reconnect your iPhone: Unplug your iPhone from the computer and reconnect it to see if that resolves the issue.
- Try a different USB port: Connect your iPhone to a different USB port on your computer to rule out any port-related issues.
- Use a different USB cable: Test with a different USB cable to eliminate the possibility of a faulty cable causing the device start error (Code 10).
- Disable security software: Temporarily disable any security software or antivirus programs that might be interfering with the connection between your iPhone and computer.
- Reset the iPhone settings: Resetting the settings on your iPhone can help resolve the device start error (Code 10). Remember to backup your data before doing this.
- Remove conflicting software: Uninstall any software that might be conflicting with the proper functioning of your iPhone.
- Contact Apple Support: If none of the above methods work, reach out to Apple Support for further assistance in resolving the device start error (Code 10).
Rebooting Your Computer
To fix the “This Device Cannot Start (Code 10)” error on your iPhone, try rebooting your computer. This simple step can often resolve common device issues.
Here’s how to reboot your computer:
1. Save any open files and close all programs.
2. Click on the “Start” menu and select “Restart” or “Shut Down.”
3. Wait for your computer to fully shut down and then turn it back on.
Once your computer reboots, check if the error is resolved. If not, try the other methods mentioned in this article.
Remember, it’s important to troubleshoot the issue systematically to identify the root cause and find the appropriate solution.
Note: If you’re using Windows 10 or Windows 11, you can also use the built-in Hardware Troubleshooter to automatically diagnose and fix hardware-related problems. To access this tool, search for “msdt.exe -id DeviceDiagnostic” in the Start menu and follow the on-screen instructions.
Rebooting your computer is a quick and easy fix that can resolve many device errors. Give it a try and see if it solves your problem.
Running the Hardware and Devices Troubleshooter
1. Press the Windows key + R to open the Run dialog box.
2. Type “control” and press Enter to open the Control Panel.
3. In the Control Panel, search for “Troubleshoot” and click on “Troubleshooting”.
4. Under “Hardware and Sound”, click on “Configure a device” or “Hardware and Devices”.
5. Follow the on-screen instructions to run the troubleshooter.
6. The troubleshooter will scan for issues and attempt to fix them automatically.
7. If any problems are found, follow the recommended solutions provided by the troubleshooter.
8. Restart your computer and check if the issue is resolved.
Running the Hardware and Devices Troubleshooter can often fix common device driver errors and system error codes, including Code 10. If this method doesn’t solve the problem, you may need to consider other troubleshooting steps or seek further assistance.
Undoing Recent Changes on the Device Driver
To undo recent changes on the device driver, follow these steps:
1. Open Device Manager by pressing the Windows key + X and selecting “Device Manager” from the menu.
2. Locate the device with the exclamation mark or “Code 10” error.
3. Right-click on the device and select “Properties.”
4. In the Properties window, go to the “Driver” tab.
5. Click on the “Roll Back Driver” button.
6. Follow the on-screen instructions to complete the rollback process.
If the rollback option is grayed out or unavailable, try the following steps:
1. Open Device Manager and locate the device with the error.
2. Right-click on the device and select “Uninstall device.”
3. Confirm the uninstallation and restart your computer.
4. After the restart, Windows will automatically reinstall the device driver.
If these methods do not resolve the issue, you may need to update the device driver or seek further assistance from the device manufacturer or support forums.
Updating Drivers for the Device
To update drivers for the device and fix the “This Device Cannot Start (Code 10)” error on your iPhone, follow these simple steps:
1. Open Device Manager on your desktop PC by pressing the Windows key + X and selecting “Device Manager” from the menu.
2. Locate the problematic device under the “Universal Serial Bus controllers” or “Portable Devices” section.
3. Right-click on the device and select “Update driver.”
4. Choose the option to automatically search for updated drivers.
5. If Windows cannot find the updated drivers, visit the manufacturer’s website (e.g., Toshiba for a Toshiba device) and download the latest drivers for your specific hardware device.
6. Install the downloaded drivers by double-clicking on the file.
7. Restart your computer to apply the changes.
Performing Windows Updates
Step 1: Open the Windows Update settings by searching for “Windows Update” in the Start menu.
Step 2: Click on “Check for updates” to search for available updates.
Step 3: Install any pending updates for your system, including drivers and software.
Step 4: Restart your computer to apply the updates.
Step 5: After the restart, reconnect your iPhone to the computer and see if the issue is resolved.
Performing Windows Updates ensures that your system has the latest drivers and software, which can help fix the “Code 10” error. Make sure to follow these steps to increase your chances of success.
Tips to Keep Hardware Error-Free
- Regularly update your software: Keeping your iPhone’s software up to date is crucial to prevent hardware errors. Install the latest updates provided by Apple to ensure optimal performance and compatibility.
- Restart your device: Sometimes a simple restart can resolve hardware errors. Power off your iPhone, wait a few seconds, and then power it back on to see if the issue persists.
- Check for loose connections: Ensure that all cables and connectors are securely attached to your iPhone. Loose connections can cause hardware errors, so double-check the charging cable, headphones, or any other peripherals.
- Clean the charging port: Over time, dust, lint, and debris can accumulate in the charging port, leading to connection problems. Gently clean the port using a soft brush or toothpick to remove any obstructions.
- Disable and re-enable the device: In the Device Manager on your Windows computer, disable the problematic device, wait for a few seconds, and then re-enable it. This can refresh the device and potentially resolve the error.
- Update device drivers: Outdated or incompatible device drivers can trigger hardware errors. Visit the official Apple website or use software like Microsoft Update to ensure your iPhone’s drivers are up to date.
- Run a hardware diagnostic: Utilize Apple’s built-in diagnostic tool or third-party software to perform a comprehensive hardware scan. Identifying and fixing any potential issues can help eliminate the error code 10.
- Uninstall and reinstall the device: Remove the problematic device from the Device Manager and then reinstall it. This can replace any corrupted files or settings that might be causing the error.
- Disable power-saving settings: Some power-saving options can interfere with the proper functioning of hardware devices. Adjust your power settings to prevent them from turning off or entering sleep mode while in use.
- Contact Apple support: If none of the above methods work, reach out to Apple’s support team for further assistance. They can provide specialized guidance and help you troubleshoot the hardware error on your iPhone.
