Fixing Winload.exe Error (0xc0000001) in Windows

I will guide you through the steps to fix the Winload.exe Error (0xc0000001) in Windows.

How to Boot into BIOS and Change Boot Order

To fix the Winload.exe Error (0xc0000001) in Windows, you may need to boot into the BIOS and change the boot order. Here’s how:

1. Start by restarting your computer.
2. As the computer boots up, look for a message that says “Press [key] to enter Setup” or something similar. The key varies depending on your computer manufacturer, but it’s usually the Delete, F2, or F12 key. Press that key to enter the BIOS.
3. Once you’re in the BIOS, use the arrow keys to navigate to the “Boot” or “Boot Order” section.
4. Look for an option that says “Boot Priority” or something similar. This is where you can change the order in which your computer boots from different devices.
5. Use the arrow keys to highlight the device you want to boot from first (e.g., USB flash drive, DVD drive), and press the “+” or “-” key to move it up or down in the boot order.
6. Once you’ve set the desired boot order, press the key specified to save your changes and exit the BIOS (usually F10).
7. Your computer will now boot from the selected device, allowing you to troubleshoot and fix the Winload.exe Error (0xc0000001) in Windows.

Methods to Disable Secure Boot and Repair Boot Record

To fix the Winload.exe Error (0xc0000001) in Windows, you may need to disable Secure Boot and repair the boot record. Here are the steps to do so:

1. Disable Secure Boot:
– Restart your computer and enter the BIOS or UEFI settings.
– Look for the Secure Boot option and disable it.
– Save the changes and exit the BIOS or UEFI settings.

2. Repair Boot Record:
– Boot your computer using a Windows installation USB or DVD.
– Select your language preferences and click “Next.”
– Click on “Repair your computer” at the bottom left.
– Select “Troubleshoot” and then “Advanced options.”
– Choose “Command Prompt” to open the command-line interface.
– Type the following command and press Enter: bootrec /fixboot
– Wait for the process to complete and then restart your computer.

Troubleshooting for Windows 7, 8/8.1/10 Users

Troubleshooting Winload.exe Error (0xc0000001) in Windows

If you’re encountering the Winload.exe Error (0xc0000001) on your Windows 7, 8/8.1, or 10 computer, follow these steps to resolve the issue:

1. Start by restarting your computer and pressing the Esc key repeatedly during the boot process to interrupt the normal startup.
2. This will take you to the Windows Boot Manager screen. Select the operating system you want to troubleshoot and press Enter.
3. Next, choose the option for Safe Mode and press Enter.
4. Once in Safe Mode, go to the Start menu and search for Command Prompt.
5. Right-click on the Command Prompt result and select Run as administrator.
6. In the Command Prompt, type the following command and press Enter: bootrec /fixmbr
7. After the command completes, type exit and press Enter to close the Command Prompt.
8. Restart your computer and check if the Winload.exe Error (0xc0000001) is resolved.

If the issue persists, it may be necessary to use advanced troubleshooting tools or seek assistance from a system administrator or technical support.

Performing Startup Repair and Uninstalling Buggy Updates

1. Start by booting your Windows computer using a Windows installation media such as a USB flash drive or an optical disc image.

2. Once you reach the Windows Setup screen, select your language preferences and click on the “Next” button.

3. On the next screen, click on the “Repair your computer” option located at the bottom left corner.

4. In the System Recovery Options, select “Troubleshoot” and then choose “Advanced options”.

5. From the list of advanced options, click on “Startup Repair” to automatically fix any startup issues.

6. If the startup repair doesn’t resolve the issue, go back to the advanced options and select “Uninstall Updates”.

7. Follow the on-screen instructions to uninstall any recent updates that may be causing the Winload.exe error.

8. Once the updates are uninstalled, restart your computer and check if the error is resolved.

Using CHKDSK Scan and BCDBoot Utility

1. Press Win + X and select Command Prompt (Admin) to open an elevated Command Prompt window.
2. Type chkdsk C: /f /r and press Enter to initiate a disk check on the C drive.
3. Press Y and then restart your computer to allow CHKDSK to scan and repair any issues on your hard drive.
4. Once the scan is complete and your computer restarts, check if the Winload.exe error (0xc0000001) is resolved.

Using BCDBoot Utility

1. Insert your Windows installation media and boot your computer from it.
2. Select your language preferences, then click on Repair your computer.
3. Choose Troubleshoot and then Advanced options.
4. Select Command Prompt to open an elevated Command Prompt window.
5. Type bcdboot C:\windows /s C: and press Enter to rebuild the Boot Configuration Data (BCD) files.
6. Restart your computer and check if the Winload.exe error (0xc0000001) is resolved.

Disabling Anti Malware Protection and Performing System Restore

To fix the Winload.exe Error (0xc0000001) in Windows, you may need to disable anti-malware protection and perform a system restore. Here’s how to do it:

1. Disable Anti-Malware Protection:
– Open the anti-malware software installed on your computer.
– Locate the settings or preferences section.
– Temporarily disable the real-time protection or any other feature that may interfere with system restore.
– Save the changes and exit the software.

2. Perform System Restore:
– Restart your computer and repeatedly press the F8 key before the Windows logo appears.
– From the Advanced Boot Options menu, select “Safe Mode” and press Enter.
– Once in Safe Mode, press the Windows key + R to open the Run dialog box.
– Type “rstrui.exe” and click OK to open the System Restore tool.
– Follow the on-screen instructions to choose a restore point and initiate the restoration process.
– Wait for the system restore to complete and then restart your computer.

By temporarily disabling anti-malware protection and performing a system restore, you can address the Winload.exe Error (0xc0000001) in Windows.

Renaming Corrupt Registry Files and Performing System Operations in Command Prompt

If you’re encountering the Winload.exe Error (0xc0000001) in Windows, you can fix it by following these steps:

1. Boot your computer using a Windows installation disc or a Windows Preinstallation Environment (WinPE) USB drive.
2. When the Windows Setup screen appears, press the Shift + F10 keys together to open the Command Prompt.

Note: If you don’t have a Windows installation disc, you can create a bootable USB drive using tools like Rufus or the Windows USB/DVD Download Tool.

3. In the Command Prompt, navigate to the Windows system directory by typing the following command and pressing Enter:
cd C:\Windows\System32

4. Next, rename the corrupt registry files by executing the following commands:
ren config config.old
ren system system.old

5. After renaming the files, you can perform system operations to fix the error. Some common operations include rebuilding the Boot Configuration Data (BCD) and repairing the Master Boot Record (MBR).

Note: The specific commands and operations may vary depending on your Windows version and the nature of the error.

Performing SFC and DISM Scans, and Disabling Hibernation

• Performing SFC Scan: Use the System File Checker (SFC) tool to scan and repair corrupted system files. Open Command Prompt as administrator and run the command sfc /scannow. This will verify and restore any damaged files that may be causing the Winload.exe error.
• Running DISM Scan: Execute the Deployment Image Servicing and Management (DISM) tool to repair the Windows image. Launch Command Prompt as administrator and enter the command dism /online /cleanup-image /restorehealth. This will restore any corrupted components that might be contributing to the 0xc0000001 error.
• Disabling Hibernation: Disable hibernation mode to resolve potential conflicts with the boot process. Open Command Prompt as administrator and type powercfg /h off. Disabling hibernation can sometimes help overcome Winload.exe errors and improve system performance.

Description and Symptoms of the “0xc0000001” Error

The “0xc0000001” error is a common issue that can occur during the booting process of Windows. This error typically indicates a problem with the Winload.exe file, which is responsible for loading the operating system.

When this error occurs, you may see an error message on your screen stating that your PC couldn’t start properly and needs to be repaired. Additionally, you may experience system crashes, slow performance, or the inability to access certain files or programs.

It’s important to note that the “0xc0000001” error can be caused by various factors, such as a corrupted or missing Winload.exe file, issues with the Windows Boot Manager, or even a hardware problem.

If you encounter this error, there are several steps you can take to resolve it. First, try restarting your computer and pressing the F8 key to access the Advanced Boot Options menu. From there, you can try using the “Startup Repair” option to fix any issues automatically.

If that doesn’t work, you can also try using the Windows installation disc or a recovery drive to access the Command Prompt and use specific commands to repair the Winload.exe file or rebuild the Windows Boot Manager.

Additionally, using specialized software like EasyBCD can also help resolve the “0xc0000001” error by managing the boot configuration data.

Causes and Fixes for the “0xc0000001” Error

Don Lara